Pages: 1 [2]
  Print  
Author Topic: Rear View Camera  (Read 1590 times)
Belix
Always Involved
****
Offline Offline

Posts: 119
Referrals: 0


« Reply #15 on: March 16, 2011, 06:48:18 pm »

here is a close up of the two different power terminals I have

The kufatec power wires on the left (two different harnesses, but same style plug), with the power terminal of the other RVC wiring harness on the right.







re the reverse wiring plug, I'll be using the plug below the steering wheel rather than tapping into the signal form the rear lights directly.

The pricture from the guide are below, but not close enough to see
I suspect they are the same quad lock terminals in the radio connection, but not sure
« Last Edit: March 16, 2011, 06:53:35 pm by Belix » Logged
SteveP
Administrator
Just look at my post count
*****
Offline Offline

Posts: 7588
Referrals: 8


WWW
« Reply #16 on: March 18, 2011, 10:35:24 am »

The terminals on the brown plug are different and use two different types (one large and one small) I known the smaller one is 000 000 009 and I believe the larger one is 000 000 025 E.
Logged
Belix
Always Involved
****
Offline Offline

Posts: 119
Referrals: 0


« Reply #17 on: March 19, 2011, 09:26:50 am »

thanks Steve. and the power? which one looks right?
Sigh, why can't VW just use one type of terminal throughout??
Logged
SteveP
Administrator
Just look at my post count
*****
Offline Offline

Posts: 7588
Referrals: 8


WWW
« Reply #18 on: March 19, 2011, 09:34:09 am »

How are you planning on doing the power, via a new fuse in the fuse box?
Logged
Belix
Always Involved
****
Offline Offline

Posts: 119
Referrals: 0


« Reply #19 on: March 20, 2011, 09:52:02 pm »

Yup, assuming of course I can figure out which the permenent power line is.
Logged
SteveP
Administrator
Just look at my post count
*****
Offline Offline

Posts: 7588
Referrals: 8


WWW
« Reply #20 on: March 20, 2011, 10:31:42 pm »

The connector on the right hand side of your pic looks like the right one for use in adding a fuse circuit  happy2

For a mini blade fuses you need repair wire 000 009 133 E which that one above looks like.
Logged
Pages: 1 [2]
  Print  
 
Jump to: